The Olymberyl Paladin 7 kW Multi Fuel Boiler Stove
Olymberyl’s secondary burn system ensures cleaner and more efficient combustion of the solid fuel and is therefore better for the environment. The insulated fire box maintains the temperature at a level which is sufficiently hot enough for the combustion of any gases and particles which have escaped from the initial burn. This reduces emissions whilst greatly increasing the efficiency and performance of the stove. The single fire door feature also adds to the increased efficiency. Complies with European, North American and Australian / New Zealand standards for emissions
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications

- Overall Height (A)670mm
- Overall Width (B)450mm
- Overall Depth (C)390mm
- Height to Centre of Rear Flue (D)572mmmm
- Width to Centre of Top Flue (E)225mm
- Depth to Centre of Flue (F)135mm
- Airwash SystemClean Burn Technology
- Efficiency75%
- Flue OutletTop Or Rear Exit
- Flue Size125 (5in)mm
- Fuel TypeMulti Fuel
- Grate TypeExternal Riddling
- Guarantee5 Year
- Number of Radiators3 Radiators (Unless Running Domestic Hot Water System)
- Other Feature 1Over Night Burn Facility
- Other Feature 2Can Burn Coal, Brown Coal Nuggets, briquettes, Turf And Peat
- Other Feature 3CE Approved Conforms To EN13240
- Output7kW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.

















