Direct Stoves uses cookies to improve your experience and our business. See our privacy/cookie policy or continue browsing to accept our use of cookies. View our cookie policy.
Broseley Hereford 5 Gas Stove
- In Stock
Special Price
£925.95
Regular Price
£1,358.50
(Price includes VAT and Delivery)
Finance this item from as little as £0.00 per Month
Description
The Broseley Hereford 5 gas stove is an efficient, effective, medium output stove at an affordable price suitable for any modern or traditional home. Based on the popular Hereford wood burning stove this gas version features the same good looks but with the no-mess advantage of gas.
The Hereford gas stove is suitable for Class 1, 2 and pre-cast chimneys, needs no additional ventilation and includes an oxygen depletion safety pilot switch to shut down the stove if dangerous fumes are detected.
The interior of the Hereford has a new, even more realistic, log effect, fuel bed, can be fitted with either a top or rear fluepipe and is available with a remote control option.
Specifications
| Guarantee | 1 Years |
|---|---|
| Construction | Steel |
| Chimney Type | Brick Chimney (Class 1), Pre Cast (Class 2), Pre Fabricated (Class 2) |
| Flue Outlet | Top & Rear (Interchangeable) |
| Flue Size | 5-inch (125mm) |
| Efficiency | 76% |
| Control Type | Manual Control |
| Fuel Type | Natural Gas Only |
| Gas Options | Natural Gas (Mains Gas) |
| Fuel Bed | Logs |
| Heat Output | 4.6kW |
| More Colours | No |
| Distance to Combustibles - Sides | 150mm |
| Distance to Combustibles - Rear | 50mm |
| Distance to Combustibles - Top | 300mm |
| Energy Rating | E |
Product Sizes
| Overall Height (A) | 606mm |
|---|---|
| Overall Width (B) | 453mm |
| Overall Depth (C) | 381mm |
| Height to Centre of Rear Flue (D) | 503mm |
| Width to Centre of Top Flue (E) | 226mm |
| Rear to Centre of Top Flue (F) | 125mm |
Liner Pack & Stove Kits
Direct Stoves - Stove Fitting Kits*
What's included in the fitting kit
*Only available for wood, multifuel and gas stoves. Excluded for the following which do not need these items: inset stoves, electric stoves, flueless and balanced flue gas stoves and outdoor & garden products.
Optional Extras.
Carbon Monoxide Detector:
Flue Liner Packs:
The flue liner pack consists of; a flue adaptor, which connects the stove pipe to the flexible flue liner, Dura Flue flexible flue liner (this will have a relevant diameter to the outlet size of the stove and 316 Grade) cut to the required length and a pot hanger rain cap, this supports the flue liner from the top of the chimney and also acts as a bird guard and rain cap.
Stove Pipe with Door:
A stove pipe with door or access point, allows the chimney to be swept through the pipe itself.
Stove Glass Insurance:
If you select to take out our stove glass insurance this covers your stove glass for the time period you select.
If your glass breaks within that time period we will send you a replacement piece of glass regardless of the reason the glass broke. All we will ask is that you send a picture of the broken glass.
The insurance only covers you for one replacement piece of glass. It doesn't cover you if you break the replacement piece of glass.
All stove glass is covered during delivery and any glass broken in transit to you will be replaced free of charge, without affecting your stove glass insurance.
Firewood Starter Bundle
What's included in the fitting kit
- 1. Black stove pipe.
- 2. A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 800mm x 400mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
- 3. We also provide you with a single stove glove that you can use for stoking the fire and adding wood without the risk of personal injury.
*Only available for wood, multifuel and gas stoves. Excluded for the following which do not need these items: inset stoves, electric stoves, flueless and balanced flue gas stoves and outdoor & garden products.
Optional Extras.
Carbon Monoxide Detector:
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
Flue Liner Packs:
The flue liner pack consists of; a flue adaptor, which connects the stove pipe to the flexible flue liner, Dura Flue flexible flue liner (this will have a relevant diameter to the outlet size of the stove and 316 Grade) cut to the required length and a pot hanger rain cap, this supports the flue liner from the top of the chimney and also acts as a bird guard and rain cap.
Stove Pipe with Door:
A stove pipe with door or access point, allows the chimney to be swept through the pipe itself.
Stove Glass Insurance:
If you select to take out our stove glass insurance this covers your stove glass for the time period you select.If your glass breaks within that time period we will send you a replacement piece of glass regardless of the reason the glass broke. All we will ask is that you send a picture of the broken glass.
The insurance only covers you for one replacement piece of glass. It doesn't cover you if you break the replacement piece of glass.
All stove glass is covered during delivery and any glass broken in transit to you will be replaced free of charge, without affecting your stove glass insurance.
Firewood Starter Bundle
Our Firewood Starter Bundle contains all you need for your first fire in your new stove.
1 box of kiln dried logs with a moisture content of less than 20% and Woodsure Ready to Burn certified.
This is UK sourced wood from sustainable forestry. The wood is pine.
1 bag of kindling and a pack of 20 natural wood eco firelighters.
Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Q & A
Hi
My tiles hearth is not totally level. Is there anyway to adjust the feet so that it sits level?
My tiles hearth is not totally level. Is there anyway to adjust the feet so that it sits level?
Question by: Sean on 20 Feb 2022, 10:12
Hi there, thank yo for getting in touch. Sorry for the delay in replying to you on this, I have heard back from the supplier who has said: "No – the feet are rigid I’m afraid."
Kind regards.
Kind regards.
Answer by: Henry Lewis on 2 Mar 2022, 14:12
How do you get the gas supply to the stove? Does it have to be under the floor?
Question by: serena on 23 Nov 2021, 18:26
Hey Serena, I hope you are well.
I have had a look through the user guide on this (which you can find at the bottom of the product page)
This is what is written re the gas supply:
"A minimum 15mm-diameter gas supply pipe must be used to within 1 metre of the installation with the final connection to the stove to be completed with the suitable 8mm semi-rigid gas pipe. The 8mm pipe should be connected to the inlet of the gas valve using the nut and 8mm olive provided. Support the control whilst finally tightening the supply pipe.
The gas supply connection to the appliance is located at the right hand side rear of the stove. The connection requires an 8mm-diameter semi-rigid pipe, not more than 1 meter in length.
Pressure Testing
Always make sure that there is adequate gas pressure and volume to the stove. The relevant pressures are on the ID plate on the gas control knob.
1. For natural gas, this is 20mbar measured at the inlet connection to the stove with the appliance in the full rate position.
2. Ensure that the gas pressure to the stove is maintained when it is operating at the same time as other appliances in the building and that a suitable pressure gauge is used i.e. a manometer. If the gas pressure is not as per above it will be the sole responsibility of the fitter to rectify and Broseley Fires will not be liable for any associated costs.
3. All figures obtained during pressure testing should be recorded on the commissioning form found at the end of these instructions. Ventilation (GB only)
The gas stove is rated at less than 7kw and therefore does not normally require additional ventilation in the room (BS5871 – part II). 200753_2 22
Spillage Testing
A Spillage Test MUST be carried out before the installed fire is left with the customer.
Carry out the test by first closing all doors and windows in the room containing the fire.
Ensure that the fire is burning at full rate for a minimum of 10-15 minutes.
Using a lighted smoke match, run it along under the rear edge of the stove. The draught diverter box is situated at the rear of the stove, the entry being in the rear panel for the stove."
I hope this helps?
I have had a look through the user guide on this (which you can find at the bottom of the product page)
This is what is written re the gas supply:
"A minimum 15mm-diameter gas supply pipe must be used to within 1 metre of the installation with the final connection to the stove to be completed with the suitable 8mm semi-rigid gas pipe. The 8mm pipe should be connected to the inlet of the gas valve using the nut and 8mm olive provided. Support the control whilst finally tightening the supply pipe.
The gas supply connection to the appliance is located at the right hand side rear of the stove. The connection requires an 8mm-diameter semi-rigid pipe, not more than 1 meter in length.
Pressure Testing
Always make sure that there is adequate gas pressure and volume to the stove. The relevant pressures are on the ID plate on the gas control knob.
1. For natural gas, this is 20mbar measured at the inlet connection to the stove with the appliance in the full rate position.
2. Ensure that the gas pressure to the stove is maintained when it is operating at the same time as other appliances in the building and that a suitable pressure gauge is used i.e. a manometer. If the gas pressure is not as per above it will be the sole responsibility of the fitter to rectify and Broseley Fires will not be liable for any associated costs.
3. All figures obtained during pressure testing should be recorded on the commissioning form found at the end of these instructions. Ventilation (GB only)
The gas stove is rated at less than 7kw and therefore does not normally require additional ventilation in the room (BS5871 – part II). 200753_2 22
Spillage Testing
A Spillage Test MUST be carried out before the installed fire is left with the customer.
Carry out the test by first closing all doors and windows in the room containing the fire.
Ensure that the fire is burning at full rate for a minimum of 10-15 minutes.
Using a lighted smoke match, run it along under the rear edge of the stove. The draught diverter box is situated at the rear of the stove, the entry being in the rear panel for the stove."
I hope this helps?
Answer by: Henry Lewis on 29 Nov 2021, 15:36
Does the remote version of this automatically switch off when room reaches temperature
Many thanks.
Many thanks.
Question by: Stephen Smith on 20 Feb 2021, 06:36
Hi there Stephen, thanks for getting in touch. The remote control has a thermostat mode yes. I hope this helps!
Answer by: Henry Lewis on 24 Feb 2021, 15:38
Delivery Info
Free 1 Man Delivery – For Full Details Please See Delivery Information
Our "Free Delivery" is a one-man service. The goods will arrive on a lorry that is about the size of a fire engine. (Please let us know in advance if you have restricted access or other local issues that could affect delivery).
The lorry has a tail lift that allows the driver to get the item(s) off the vehicle. The order will be packed and secured onto a pallet and the driver will have a pallet truck. He'll be able to wheel this as close as possible to your property. The pallet truck can only be wheeled over a finished surface so it's not possible to wheel it over a gravelled drive, steps, steep slopes for example. The pallets are normally about 1m wide so this is the minimum width gate they can fit through. Please note that the driver is not insured to unpack or carry the item(s) into your house.
Fitting Kits and Liner Packs might arrive separately by courier delivery on the same day unless specified/requested in advance. An email confirmation will be sent if this is the case.
If the goods are showing 48hr delivery, then this is the quickest time we're able to deliver these items (We do not deliver at weekends). You'll be asked to select a delivery date when purchasing the goods. Please note that if you live offshore these dates do not apply as it will take us slightly longer to get the goods to you and we will contact you directly.
Please note that it is an all-day delivery service which is generally from 9 am – 6 pm Monday to Friday. Delivery Depots, if they have the facility, will text in advance but as the vans do multiple runs a day you might not receive a text until the afternoon if this service is available.
Due to current pallet network pressures mainly due to driver shortages we cannot guarantee delivery on your chosen day but will do our best to communicate this as soon as we are made aware by the carriers.
Two Man Delivery (£75) – For Full Details Please See Delivery Information
As the name suggests with our two-man delivery service the goods will be delivered by two men. They will carry your stove into the room of your choice (subject to any changes due to covid restrictions).
They will normally carry it up 1 flight of stairs (if it's safe to do so) but this is at their discretion so if you have a 3rd floor flat, please inform us beforehand to avoid any issues during delivery.
The two-man delivery normally takes 5-10 working days to be delivered once we receive the stock into our own warehouse, but this timescale can be dependent on where you live. We expect the lead time to extend during busier periods/later months of the year. Once the goods come into stock you will be contacted, and delivery arranged.
Please contact us directly if you wish to take advantage of our 2-man service.
PLEASE NOTE THAT WE STRONGLY ADVISE THAT YOU DO NOT BOOK ANY CONTRACTORS, PLUMBER’S, OR FITTERS UNTIL YOU HAVE RECEIVED YOUR GOODS AS UNEXPECTED DELAYS CAN OCCUR.
Pay by Finance
* Choose v12finance package plan
The options you selected are not available in these circumstances
User Manuals and Guides
(Size: 1.9 MB)
Installation instructions and user manual for the Broseley gas stove models including:
Desire 5 gas stove
Hereford 5 gas stove
Ignite 5 gas stove
Desire 5 gas stove
Hereford 5 gas stove
Ignite 5 gas stove
(Size: 927.9 KB)
Installation manual and user guide for the Broseley Stoves LPG gas stove models including:
Desire 5 LPG Gas Stove
Hereford 5 LPG Gas Stove
Ignite 5 LPG Gas Stove
Desire 5 LPG Gas Stove
Hereford 5 LPG Gas Stove
Ignite 5 LPG Gas Stove
(Size: 142.8 KB)
Flue & Ducting Warranty sheet for Chimney Liner. Please read carefully if you have ordered a liner kit with your stove. Contains important information.
You might also like...
