The Woodfire EcoDesign 2020 ready range represent the latest generation of wood-burning stoves.
Designed to work with modern, well insulated houses up to any size, the EX15 offers generous amounts of heart for the central heating and domestic hot water, while giving the minimum amount of heat to the room. Available in three models with a choice of, with different kW heat outputs yet efficiency of up to 84% this simply designed boiler stoves will blend perfectly into its surroundings. This boiler stove has a 15kW output, which gives it its name.
It comes complete with a fully glazed door with a cool to the touch stainless steel handle.
This product arrives with the following required items, which are included in the price shown:
Overheat Safety Valve
LK 810 ThermoMat 2.0G load unit
LK flue thermostat
The EX range must be installed with a flue draught stabiliser for extended warranty, you will need to ensure the flue draught stabiliser is compatible with the flue liner you use with this stove.
Please head to the bottom of this page to find the User Manual & Instructions for the Woodfire EX15 Eco Boiler Stove.
Important Installation Instructions
The stove must be installed on a non-combustible hearth. Floors made of combustible material
must be protected by a layer of non-flammable material. This can be done, for example, by tiles or
a plate made of glass or sheet metal at least 12mm thick.
The non-combustible hearth must extend at least 300mm in front of the appliance and must be at
least 150mm wider than the body of the stove on each side.
Where an insert model is positioned higher up the wall, it is strongly recommended that the non-combustible hearth should extend the required 300mm plus the distance from the hearth to the base of the door opening. The width of the hearth should also be increased in that situation.