Villager Flatmate Woodburning Stove
The Flatmate 'B' low and 'B' high are the mid-range and most popular Woodburning stoves. Primarily for burning wood, a solid fuel grate conversion kit is available and extra for those wishing to have the flexibility of burning either fuel.
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
- Overall Height (A)572mm
- Overall Width (B)600mm
- Overall Depth (C)350mm
- Height to Centre of Rear Flue (D)458mm
- Width to Centre of Top Flue (E)286mm
- Depth to Centre of Flue (F)136mm
- Flue OutletTop or Rear Exit
- Flue Size125mm
- Fuel TypeWoodburning
- Grate TypeWoodburning Grate
- Guarantee3 Years
- Other Feature 1Primarily and Secondary Air Controls
- Other Feature 2Average Heated Area 28 to 112m³
- Other Feature 3Vermiculite Lined Chamber
- Output8kW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
