Villager Elite Twin Door Multi Fuel Stove
Incorporating the advanced technology found in all the Villager multi fuel stoves the elite range of stoves have a very high output in comparison to it's physical size, giving you a high output multi fuel stove without having a large over sized stove. The Elite range of stoves are also available with a wood burning conversion kit.
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
- Overall Height (A)601mm
- Overall Width (B)666mm
- Overall Depth (C)380mm
- Height to Centre of Rear Flue (D)484mm
- Width to Centre of Top Flue (E)300mm
- Depth to Centre of Flue (F)138mm
- Airwash SystemClean Burn Airwash System
- Flue OutletTop or Rear Exit
- Flue Size150mm
- Fuel TypeMultifuel
- Grate TypeRiddling Grate
- Guarantee3 Years
- Other Feature 1Burns Wood And Solid Fuel
- Other Feature 2Comes With Ashpan
- Other Feature 3Average Heated Area 28 to 126m³
- Output9kW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
