Villager Chelsea Duo Series 3 Multi Fuel Stove
The very popular Chelsea Duo multi fuel stove has a classic look of a multi fuel stove yet is full of all the latest technology you come to expect from Villager stoves. With a 5kW output and a heating area of up to 70m3 the Chelsea is one of the most popular stoves from Villager and with the conversion kit it can quickly be turned into a dedicated wood burning stove.
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
- Overall Height (A)480mm
- Overall Width (B)452mm
- Overall Depth (C)334mm
- Height to Centre of Rear Flue (D)375mm
- Width to Centre of Top Flue (E)240mm
- Depth to Centre of Flue (F)102mm
- Airwash SystemClean Burn Airwash System
- Flue OutletTop or Rear Exit
- Flue Size125mm
- Fuel TypeMultifuel
- Grate TypeRiddling Grate
- Guarantee3 Years
- Other Feature 1Burns Wood And Solid Fuel
- Other Feature 2Comes With Ashpan
- Other Feature 3Average Heated Area 14 to 70m³
- Output5kW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
