Lilyking 667 Double Door Multifuel Boiler Stove
The Lilyking 667 has been engineered for a hard working and long life. This great looking stove is built to last and will look perfect in any home.
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
- Overall Height (A)690mm
- Overall Width (B)665mm
- Overall Depth (C)670mm
- Height to Centre of Rear Flue (D)0mm
- Width to Centre of Top Flue (E)332mm
- Depth to Centre of Flue (F)0mm
- Airwash SystemSpecial Airwash System
- Efficiency75%
- Flue OutletTop Exit
- Flue Size150 (6in)mm
- Fuel TypeMultifuel
- Grate TypeRiddling Grate
- Guarantee5 Years
- Number of Radiators12
- Other Feature 1Overnight Burning Facility
- Other Feature 2Controlled Burn Rate
- Other Feature 3Secondary Combustion
- Output3.5kW
- Output To Room3.5kwkW
- Output To Water15kwkW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
