Invicta Regent Woodburing Sotve
The regent is a simple yet tradtional style stove with a slight decroative pattern. The Regent has a heat output of 12kW capable of heating rooms sized 64/192m. With a large glass window and an exceptional airwash system the stove allows you to enjoy the full flame of the roaring log fire. Enjoy the exceptional view of the fire in a relaxed and congenial atmosphere.
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
- Overall Height (A)736mm
- Overall Width (B)764mm
- Overall Depth (C)444mm
- Height to Centre of Rear Flue (D)562mm
- Airwash SystemYes
- ConstructionCast Iron
- Efficiency72.6%
- Flue OutletTop or Rear Exit
- Flue Size150mm
- Fuel TypeWoodburning
- Grate TypeWoodburning Grate
- Guarantee5 Years
- Other Feature 1Solid Cast Iron Construction
- Other Feature 2Large Glass Window
- Other Feature 3Max Log Length: 550
- Output12kW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
