All clean lines with a sleek steel body and cast iron door, the Kestrel brings an elegant warmth to your home. This Cost-efficient stove is neatly proportioned and simply styled for a look that suits any king of decor. The clean design is matched with a clean nature, a hot Airwash system keeps the glass clean and clear, with a cool-touch handle allow you to riddle the grate swiftly.
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
Overall Height (A)
Overall Width (B)
Overall Depth (C)
Height to Centre of Rear Flue (D)
Width to Centre of Top Flue (E)
Depth to Centre of Flue (F)
Exceptionally Hot Airwash
Steel body with cast doors
Top or Rear Exit
Multifuel or Woodburning
Multifuel Riddling Grate
Other Feature 1
Easy Access For Chimney Sweeping
Other Feature 2
CE Tested And Approved
Other Feature 3
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.