Hunter Herald 5 Slimline Woodburning Stove
The popular choice Herald 5 slimline is a slimmer version of a tried and tested classic. Hunter made no compromise on performance; they just built it to suit a shallower fireplace opening. The Herald 5 slimline has all the options to make it suitable for both modern and traditional rooms, with single door or double door (with removable crosses).
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
- Overall Height (A)567mm
- Overall Width (B)546mm
- Overall Depth (C)344mm
- Height to Centre of Rear Flue (D)469mm
- Depth to Centre of Flue (F)88mm
- Airwash SystemYes
- ConstructionSteel body/cast doors
- Efficiency72.5%
- Flue OutletTop and rear exit
- Flue Size125mm
- Fuel TypeWoodburning
- Grate TypeWoodburning grate
- Guarantee5 Years
- Other Feature 1Primary, secondary & tertiary air supply
- Other Feature 2Easy access for chimney sweeping
- Other Feature 3New internal lining system - allowing for a larger firebox
- Output4kW - 5kW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
