Green Enamel 7.3kW Multifuel DEFRA Approved Stove
The Carron multifuel stove is perfect for burning seasoned wood, coal and smokeless fuel. With it's cast iron construction it allows for longer burn periods and retains the heat for much longer even when the fire in the stove has gone out.
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
- Overall Height (A)662mm
- Overall Width (B)520mm
- Overall Depth (C)375mm
- Height to Centre of Rear Flue (D)0mm
- Width to Centre of Top Flue (E)0mm
- Depth to Centre of Flue (F)0mm
- Airwash SystemYes
- ConstructionCast Iron
- Efficiency72.1%
- Flue OutletTop or Rear Flue
- Flue Size150mm
- Fuel TypeMultifuel
- Grate TypeRiddling Grate
- Guarantee1 Year on body of stove
- Other Feature 1Primary & Secondary Burn
- Other Feature 2Solid Cast Design
- Other Feature 3Choice Of Finishes
- Output7.3kW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
