Esse 525 Gas Stove
The 525 stands solidly on 2" full height stainless tubular steel legs culminating at a steel top that has been laser cut to echo the curved of the legs. The result is a clean contemporary look with a softer edge.
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
- Overall Height (A)595mm
- Overall Width (B)465mm
- Overall Depth (C)383mm
- Height to Centre of Rear Flue (D)0mm
- Width to Centre of Top Flue (E)298mm
- Depth to Centre of Flue (F)140mm
- Airwash SystemYes
- ConstructionSteel
- EfficiencyN/A%
- Flue OutletTop or Rear
- Flue Size125mm
- Fuel TypeGas
- Grate TypeMultifuel Grate
- Guarantee1 Year
- Other Feature 1Stylish Stainless Steel Legs
- Other Feature 2Made in Britain
- Other Feature 3Realistic flame effect
- Output3.5kW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
