Ecoburn 5 Multifuel Boiler Stove
For those who take the enviroment seriously we can offer the highly efficient Ecoburn multifuel stove. The Ecoburn stove gives you more control over how you burn your fuel. Enabling you to genertae more heat, using less fuel so contributing to a a cleaner enviroment. Aarrow has achived this through a combination of clever enviromental features and excellence in engineering. The Ecoburn multifuel stove has a gently curved steel body , large viewing window for a beautiful view of the fire.
Please use the tabs at the top of the page to view the stoves Dimensions and Specifications
- Overall Height (A)522mm
- Overall Width (B)397mm
- Overall Depth (C)388mm
- Height to Centre of Rear Flue (D)424mm
- Width to Centre of Top Flue (E)263mm
- Depth to Centre of Flue (F)94mm
- Airwash SystemYes
- ConstructionSteel
- Efficiency74.7%
- Flue OutletTop or Rear Flue
- Flue Size102mm
- Fuel TypeMultifuel
- Grate TypeRiddling Grate
- GuaranteeLifetime on body of stove
- Number of Radiators0 Hot Water Only
- Other Feature 1Primary & Secondary Burn
- Other Feature 2Primary Air Diversion System
- Other Feature 3Self levelling rear legs
- Output4.5kW
- Output To Room3.2kW
- Output To Water1.8kW
No reviews have been written.
Be the first to write one
Free Offer: We offer a free 500mm matt black enamelled stove pipe and register plate with all our stoves (excludes electric stoves, flueless and balanced flue gas stoves). Please make the relevant selection above when placing your order if you require any of these parts and also select whether or not you require a Carbon Monoxide alarm sending out with your order. Please note that if these parts aren't selected with your order we can't send them for free after your order has been delivered.
Due to an update to Building Regulations it is now law to have a Carbon Monoxide alarm present in any room with a solid fuel appliance:- The Building Regulations 2000 Approved Document J (2010 Edition) '2.34 Where a new or replacement fixed solid fuel appliance is installed in the dwelling, a carbon monoxide alarm should be provided in the room where the appliance is located.'
A registration plate is used to seal the chimney opening off from the room preventing dust, soot, dirt and debris falling down the chimney. It also helps to prevent a draft coming down the chimney. We supply a standard 1000mm - 500mm galvanised steel register plate with all our stoves. You will simply need to cut the plate to size to fit into your chimney opening.
